# AdGuard Home Changelog All notable changes to this project will be documented in this file. The format is based on [*Keep a Changelog*](https://keepachangelog.com/en/1.0.0/), and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html). ## [Unreleased] ### Added - Logs are now collected by default on FreeBSD and OpenBSD when AdGuard Home is installed as a service ([#4213]). - `windows/arm64` support ([#3057]). ### Changed - Domain-specific private reverse DNS upstream servers are now validated to allow only `*.in-addr.arpa` and `*.ip6.arpa` domains pointing to locally-served networks ([#3381]). **Note:** If you already have invalid entires in your configuration, consider removing them manually, since they essentially had no effect. - Response filtering is now performed using the record types of the answer section of messages as opposed to the type of the question ([#4238]). - Instead of adding the build time information, the build scripts now use the standardized environment variable [`SOURCE_DATE_EPOCH`][repr] to add the date of the commit from which the binary was built ([#4221]). This should simplify reproducible builds for package maintainers and those who compile their own AdGuard Home. - The setting `local_domain_name` is now in the `dhcp` block in the configuration file to avoid confusion ([#3367]). - The `dns.bogus_nxdomain` configuration file parameter now supports CIDR notation alongside IP addresses ([#1730]). #### Configuration Changes In this release, the schema version has changed from 12 to 13. - Parameter `local_domain_name`, which in schema versions 12 and earlier used to be a part of the `dns` object, is now a part of the `dhcp` object: ```yaml # BEFORE: 'dns': # … 'local_domain_name': 'lan' # AFTER: 'dhcp': # … 'local_domain_name': 'lan' ``` To rollback this change, move the parameter back into `dns` and change the `schema_version` back to `12`. ### Deprecated - Go 1.17 support. v0.109.0 will require at least Go 1.18 to build. ### Fixed - Optimistic cache now responds with expired items even if those can't be resolved again ([#4254]). - Unnecessarily complex hosts-related logic leading to infinite recursion in some cases ([#4216]). ### Removed - Go 1.16 support. ### Security - Enforced password strength policy ([3503]). - Weaker cipher suites that use the CBC (cipher block chaining) mode of operation have been disabled ([#2993]). [#1730]: https://github.com/AdguardTeam/AdGuardHome/issues/1730 [#2993]: https://github.com/AdguardTeam/AdGuardHome/issues/2993 [#3057]: https://github.com/AdguardTeam/AdGuardHome/issues/3057 [#3367]: https://github.com/AdguardTeam/AdGuardHome/issues/3367 [#3381]: https://github.com/AdguardTeam/AdGuardHome/issues/3381 [#3503]: https://github.com/AdguardTeam/AdGuardHome/issues/3503 [#4213]: https://github.com/AdguardTeam/AdGuardHome/issues/4213 [#4216]: https://github.com/AdguardTeam/AdGuardHome/issues/4216 [#4221]: https://github.com/AdguardTeam/AdGuardHome/issues/4221 [#4238]: https://github.com/AdguardTeam/AdGuardHome/issues/4238 [#4254]: https://github.com/AdguardTeam/AdGuardHome/issues/4254 [repr]: https://reproducible-builds.org/docs/source-date-epoch/ ## [v0.107.3] - 2022-01-25 See also the [v0.107.3 GitHub milestone][ms-v0.107.3]. ### Added - Support for a `$dnsrewrite` modifier with an empty `NOERROR` response ([#4133]). ### Fixed - Wrong set of ports checked for duplicates during the initial setup ([#4095]). - Incorrectly invalidated service domains ([#4120]). - Poor testing of domain-specific upstream servers ([#4074]). - Omitted aliases of hosts specified by another line within the OS's hosts file ([#4079]). [#4074]: https://github.com/AdguardTeam/AdGuardHome/issues/4074 [#4079]: https://github.com/AdguardTeam/AdGuardHome/issues/4079 [#4095]: https://github.com/AdguardTeam/AdGuardHome/issues/4095 [#4120]: https://github.com/AdguardTeam/AdGuardHome/issues/4120 [#4133]: https://github.com/AdguardTeam/AdGuardHome/issues/4133 [ms-v0.107.3]: https://github.com/AdguardTeam/AdGuardHome/milestone/40?closed=1 ## [v0.107.2] - 2021-12-29 See also the [v0.107.2 GitHub milestone][ms-v0.107.2]. ### Fixed - Infinite loops when TCP connections time out ([#4042]). [#4042]: https://github.com/AdguardTeam/AdGuardHome/issues/4042 [ms-v0.107.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/38?closed=1 ## [v0.107.1] - 2021-12-29 See also the [v0.107.1 GitHub milestone][ms-v0.107.1]. ### Changed - The validation error message for duplicated allow- and blocklists in DNS settings now shows the duplicated elements ([#3975]). ### Fixed - `ipset` initialization bugs ([#4027]). - Legacy DNS rewrites from a wildcard pattern to a subdomain ([#4016]). - Service not being stopped before running the `uninstall` service action ([#3868]). - Broken `reload` service action on FreeBSD. - Legacy DNS rewrites responding from upstream when a request other than `A` or `AAAA` is received ([#4008]). - Panic on port availability check during installation ([#3987]). - Incorrect application of rules from the OS's hosts files ([#3998]). [#3868]: https://github.com/AdguardTeam/AdGuardHome/issues/3868 [#3975]: https://github.com/AdguardTeam/AdGuardHome/issues/3975 [#3987]: https://github.com/AdguardTeam/AdGuardHome/issues/3987 [#3998]: https://github.com/AdguardTeam/AdGuardHome/issues/3998 [#4008]: https://github.com/AdguardTeam/AdGuardHome/issues/4008 [#4016]: https://github.com/AdguardTeam/AdGuardHome/issues/4016 [#4027]: https://github.com/AdguardTeam/AdGuardHome/issues/4027 [ms-v0.107.1]: https://github.com/AdguardTeam/AdGuardHome/milestone/37?closed=1 ## [v0.107.0] - 2021-12-21 See also the [v0.107.0 GitHub milestone][ms-v0.107.0]. ### Added - Upstream server information for responses from cache ([#3772]). Note that old log entries concerning cached responses won't include that information. - Finnish and Ukrainian translations. - Setting the timeout for IP address pinging in the "Fastest IP address" mode through the new `fastest_timeout` field in the configuration file ([#1992]). - Static IP address detection on FreeBSD ([#3289]). - Optimistic cache ([#2145]). - New possible value of `6h` for `querylog_interval` setting ([#2504]). - Blocking access using ClientIDs ([#2624], [#3162]). - `source` directives support in `/etc/network/interfaces` on Linux ([#3257]). - RFC 9000 support in DNS-over-QUIC. - Completely disabling statistics by setting the statistics interval to zero ([#2141]). - The ability to completely purge DHCP leases ([#1691]). - Settable timeouts for querying the upstream servers ([#2280]). - Configuration file parameters to change group and user ID on startup on Unix ([#2763]). - Experimental OpenBSD support for AMD64 and 64-bit ARM CPUs ([#2439], [#3225], [#3226]). - Support for custom port in DNS-over-HTTPS profiles for Apple's devices ([#3172]). - `darwin/arm64` support ([#2443]). - `freebsd/arm64` support ([#2441]). - Output of the default addresses of the upstreams used for resolving PTRs for private addresses ([#3136]). - Detection and handling of recurrent PTR requests for locally-served addresses ([#3185]). - The ability to completely disable reverse DNS resolving of IPs from locally-served networks ([#3184]). - New flag `--local-frontend` to serve dynamically changeable frontend files from disk as opposed to the ones that were compiled into the binary. ### Changed - Port bindings are now checked for uniqueness ([#3835]). - The DNSSEC check now simply checks against the AD flag in the response ([#3904]). - Client objects in the configuration file are now sorted ([#3933]). - Responses from cache are now labeled ([#3772]). - Better error message for ED25519 private keys, which are not widely supported ([#3737]). - Cache now follows RFC more closely for negative answers ([#3707]). - `$dnsrewrite` rules and other DNS rewrites will now be applied even when the protection is disabled ([#1558]). - DHCP gateway address, subnet mask, IP address range, and leases validations ([#3529]). - The `systemd` service script will now create the `/var/log` directory when it doesn't exist ([#3579]). - Items in allowed clients, disallowed clients, and blocked hosts lists are now required to be unique ([#3419]). - The TLS private key previously saved as a string isn't shown in API responses anymore ([#1898]). - Better OpenWrt detection ([#3435]). - DNS-over-HTTPS queries that come from HTTP proxies in the `trusted_proxies` list now use the real IP address of the client instead of the address of the proxy ([#2799]). - Clients who are blocked by access settings now receive a `REFUSED` response when a protocol other than DNS-over-UDP and DNSCrypt is used. - `querylog_interval` setting is now formatted in hours. - Query log search now supports internationalized domains ([#3012]). - Internationalized domains are now shown decoded in the query log with the original encoded version shown in request details ([#3013]). - When /etc/hosts-type rules have several IPs for one host, all IPs are now returned instead of only the first one ([#1381]). - The setting `rlimit_nofile` is now in the `os` block of the configuration file, together with the new `group` and `user` settings ([#2763]). - Permissions on filter files are now `0o644` instead of `0o600` ([#3198]). #### Configuration Changes In this release, the schema version has changed from 10 to 12. - Parameter `dns.querylog_interval`, which in schema versions 11 and earlier used to be an integer number of days, is now a string with a human-readable duration: ```yaml # BEFORE: 'dns': # … 'querylog_interval': 90 # AFTER: 'dns': # … 'querylog_interval': '2160h' ``` To rollback this change, convert the parameter back into days and change the `schema_version` back to `11`. - Parameter `rlimit_nofile`, which in schema versions 10 and earlier used to be on the top level, is now moved to the new `os` object: ```yaml # BEFORE: 'rlimit_nofile': 42 # AFTER: 'os': 'group': '' 'rlimit_nofile': 42 'user': '' ``` To rollback this change, move the parameter on the top level and change the `schema_version` back to `10`. ### Deprecated - Go 1.16 support. v0.108.0 will require at least Go 1.17 to build. ### Fixed - EDNS0 TCP keepalive option handling ([#3778]). - Rules with the `$denyallow` modifier applying to IP addresses when they shouldn't ([#3175]). - The length of the EDNS0 client subnet option appearing too long for some upstream servers ([#3887]). - Invalid redirection to the HTTPS web interface after saving enabled encryption settings ([#3558]). - Incomplete propagation of the client's IP anonymization setting to the statistics ([#3890]). - Incorrect `$dnsrewrite` results for entries from the operating system's hosts file ([#3815]). - Matching against rules with `|` at the end of the domain name ([#3371]). - Incorrect assignment of explicitly configured DHCP options ([#3744]). - Occasional panic during shutdown ([#3655]). - Addition of IPs into only one as opposed to all matching ipsets on Linux ([#3638]). - Removal of temporary filter files ([#3567]). - Panic when an upstream server responds with an empty question section ([#3551]). - 9GAG blocking ([#3564]). - DHCP now follows RFCs more closely when it comes to response sending and option selection ([#3443], [#3538]). - Occasional panics when reading old statistics databases ([#3506]). - `reload` service action on macOS and FreeBSD ([#3457]). - Inaccurate using of service actions in the installation script ([#3450]). - ClientID checking ([#3437]). - Discovering other DHCP servers on `darwin` and `freebsd` ([#3417]). - Switching listening address to unspecified one when bound to a single specified IPv4 address on Darwin (macOS) ([#2807]). - Incomplete HTTP response for static IP address. - DNSCrypt queries weren't appearing in query log ([#3372]). - Wrong IP address for proxied DNS-over-HTTPS queries ([#2799]). - Domain name letter case mismatches in DNS rewrites ([#3351]). - Conflicts between IPv4 and IPv6 DNS rewrites ([#3343]). - Letter case mismatches in `CNAME` filtering ([#3335]). - Occasional breakages on network errors with DNS-over-HTTP upstreams ([#3217]). - Errors when setting static IP on Linux ([#3257]). - Treatment of domain names and FQDNs in custom rules with `$dnsrewrite` that use the `PTR` type ([#3256]). - Redundant hostname generating while loading static leases with empty hostname ([#3166]). - Domain name case in responses ([#3194]). - Custom upstreams selection for clients with ClientIDs in DNS-over-TLS and DNS-over-HTTP ([#3186]). - Incorrect client-based filtering applying logic ([#2875]). ### Removed - Go 1.15 support. [#1381]: https://github.com/AdguardTeam/AdGuardHome/issues/1381 [#1558]: https://github.com/AdguardTeam/AdGuardHome/issues/1558 [#1691]: https://github.com/AdguardTeam/AdGuardHome/issues/1691 [#1898]: https://github.com/AdguardTeam/AdGuardHome/issues/1898 [#1992]: https://github.com/AdguardTeam/AdGuardHome/issues/1992 [#2141]: https://github.com/AdguardTeam/AdGuardHome/issues/2141 [#2145]: https://github.com/AdguardTeam/AdGuardHome/issues/2145 [#2280]: https://github.com/AdguardTeam/AdGuardHome/issues/2280 [#2439]: https://github.com/AdguardTeam/AdGuardHome/issues/2439 [#2441]: https://github.com/AdguardTeam/AdGuardHome/issues/2441 [#2443]: https://github.com/AdguardTeam/AdGuardHome/issues/2443 [#2504]: https://github.com/AdguardTeam/AdGuardHome/issues/2504 [#2624]: https://github.com/AdguardTeam/AdGuardHome/issues/2624 [#2763]: https://github.com/AdguardTeam/AdGuardHome/issues/2763 [#2799]: https://github.com/AdguardTeam/AdGuardHome/issues/2799 [#2807]: https://github.com/AdguardTeam/AdGuardHome/issues/2807 [#3012]: https://github.com/AdguardTeam/AdGuardHome/issues/3012 [#3013]: https://github.com/AdguardTeam/AdGuardHome/issues/3013 [#3136]: https://github.com/AdguardTeam/AdGuardHome/issues/3136 [#3162]: https://github.com/AdguardTeam/AdGuardHome/issues/3162 [#3166]: https://github.com/AdguardTeam/AdGuardHome/issues/3166 [#3172]: https://github.com/AdguardTeam/AdGuardHome/issues/3172 [#3175]: https://github.com/AdguardTeam/AdGuardHome/issues/3175 [#3184]: https://github.com/AdguardTeam/AdGuardHome/issues/3184 [#3185]: https://github.com/AdguardTeam/AdGuardHome/issues/3185 [#3186]: https://github.com/AdguardTeam/AdGuardHome/issues/3186 [#3194]: https://github.com/AdguardTeam/AdGuardHome/issues/3194 [#3198]: https://github.com/AdguardTeam/AdGuardHome/issues/3198 [#3217]: https://github.com/AdguardTeam/AdGuardHome/issues/3217 [#3225]: https://github.com/AdguardTeam/AdGuardHome/issues/3225 [#3226]: https://github.com/AdguardTeam/AdGuardHome/issues/3226 [#3256]: https://github.com/AdguardTeam/AdGuardHome/issues/3256 [#3257]: https://github.com/AdguardTeam/AdGuardHome/issues/3257 [#3289]: https://github.com/AdguardTeam/AdGuardHome/issues/3289 [#3335]: https://github.com/AdguardTeam/AdGuardHome/issues/3335 [#3343]: https://github.com/AdguardTeam/AdGuardHome/issues/3343 [#3351]: https://github.com/AdguardTeam/AdGuardHome/issues/3351 [#3371]: https://github.com/AdguardTeam/AdGuardHome/issues/3371 [#3372]: https://github.com/AdguardTeam/AdGuardHome/issues/3372 [#3417]: https://github.com/AdguardTeam/AdGuardHome/issues/3417 [#3419]: https://github.com/AdguardTeam/AdGuardHome/issues/3419 [#3435]: https://github.com/AdguardTeam/AdGuardHome/issues/3435 [#3437]: https://github.com/AdguardTeam/AdGuardHome/issues/3437 [#3443]: https://github.com/AdguardTeam/AdGuardHome/issues/3443 [#3450]: https://github.com/AdguardTeam/AdGuardHome/issues/3450 [#3457]: https://github.com/AdguardTeam/AdGuardHome/issues/3457 [#3506]: https://github.com/AdguardTeam/AdGuardHome/issues/3506 [#3529]: https://github.com/AdguardTeam/AdGuardHome/issues/3529 [#3538]: https://github.com/AdguardTeam/AdGuardHome/issues/3538 [#3551]: https://github.com/AdguardTeam/AdGuardHome/issues/3551 [#3558]: https://github.com/AdguardTeam/AdGuardHome/issues/3558 [#3564]: https://github.com/AdguardTeam/AdGuardHome/issues/3564 [#3567]: https://github.com/AdguardTeam/AdGuardHome/issues/3567 [#3568]: https://github.com/AdguardTeam/AdGuardHome/issues/3568 [#3579]: https://github.com/AdguardTeam/AdGuardHome/issues/3579 [#3607]: https://github.com/AdguardTeam/AdGuardHome/issues/3607 [#3638]: https://github.com/AdguardTeam/AdGuardHome/issues/3638 [#3655]: https://github.com/AdguardTeam/AdGuardHome/issues/3655 [#3707]: https://github.com/AdguardTeam/AdGuardHome/issues/3707 [#3737]: https://github.com/AdguardTeam/AdGuardHome/issues/3737 [#3744]: https://github.com/AdguardTeam/AdGuardHome/issues/3744 [#3772]: https://github.com/AdguardTeam/AdGuardHome/issues/3772 [#3778]: https://github.com/AdguardTeam/AdGuardHome/issues/3778 [#3815]: https://github.com/AdguardTeam/AdGuardHome/issues/3815 [#3835]: https://github.com/AdguardTeam/AdGuardHome/issues/3835 [#3887]: https://github.com/AdguardTeam/AdGuardHome/issues/3887 [#3890]: https://github.com/AdguardTeam/AdGuardHome/issues/3890 [#3904]: https://github.com/AdguardTeam/AdGuardHome/issues/3904 [#3933]: https://github.com/AdguardTeam/AdGuardHome/pull/3933 [ms-v0.107.0]: https://github.com/AdguardTeam/AdGuardHome/milestone/23?closed=1 ## [v0.106.3] - 2021-05-19 See also the [v0.106.3 GitHub milestone][ms-v0.106.3]. ### Added - Support for reinstall (`-r`) and uninstall (`-u`) flags in the installation script ([#2462]). - Support for DHCP `DECLINE` and `RELEASE` message types ([#3053]). ### Changed - Add microseconds to log output. ### Fixed - Intermittent "Warning: ID mismatch" errors ([#3087]). - Error when using installation script on some ARMv7 devices ([#2542]). - DHCP leases validation ([#3107], [#3127]). - Local PTR request recursion in Docker containers ([#3064]). - Ignoring client-specific filtering settings when filtering is disabled in general settings ([#2875]). - Disallowed domains are now case-insensitive ([#3115]). [#2462]: https://github.com/AdguardTeam/AdGuardHome/issues/2462 [#2542]: https://github.com/AdguardTeam/AdGuardHome/issues/2542 [#2875]: https://github.com/AdguardTeam/AdGuardHome/issues/2875 [#3053]: https://github.com/AdguardTeam/AdGuardHome/issues/3053 [#3064]: https://github.com/AdguardTeam/AdGuardHome/issues/3064 [#3107]: https://github.com/AdguardTeam/AdGuardHome/issues/3107 [#3115]: https://github.com/AdguardTeam/AdGuardHome/issues/3115 [#3127]: https://github.com/AdguardTeam/AdGuardHome/issues/3127 [ms-v0.106.3]: https://github.com/AdguardTeam/AdGuardHome/milestone/35?closed=1 ## [v0.106.2] - 2021-05-06 See also the [v0.106.2 GitHub milestone][ms-v0.106.2]. ### Fixed - Uniqueness validation for dynamic DHCP leases ([#3056]). [#3056]: https://github.com/AdguardTeam/AdGuardHome/issues/3056 [ms-v0.106.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/34?closed=1 ## [v0.106.1] - 2021-04-30 See also the [v0.106.1 GitHub milestone][ms-v0.106.1]. ### Fixed - Local domain name handling when the DHCP server is disabled ([#3028]). - Normalization of previously-saved invalid static DHCP leases ([#3027]). - Validation of IPv6 addresses with zones in system resolvers ([#3022]). [#3022]: https://github.com/AdguardTeam/AdGuardHome/issues/3022 [#3027]: https://github.com/AdguardTeam/AdGuardHome/issues/3027 [#3028]: https://github.com/AdguardTeam/AdGuardHome/issues/3028 [ms-v0.106.1]: https://github.com/AdguardTeam/AdGuardHome/milestone/33?closed=1 ## [v0.106.0] - 2021-04-28 See also the [v0.106.0 GitHub milestone][ms-v0.106.0]. ### Added - The ability to block user for login after configurable number of unsuccessful attempts for configurable time ([#2826]). - `$denyallow` modifier for filters ([#2923]). - Hostname uniqueness validation in the DHCP server ([#2952]). - Hostname generating for DHCP clients which don't provide their own ([#2723]). - New flag `--no-etc-hosts` to disable client domain name lookups in the operating system's /etc/hosts files ([#1947]). - The ability to set up custom upstreams to resolve PTR queries for local addresses and to disable the automatic resolving of clients' addresses ([#2704]). - Logging of the client's IP address after failed login attempts ([#2824]). - Search by clients' names in the query log ([#1273]). - Verbose version output with `-v --version` ([#2416]). - The ability to set a custom TLD or domain name for known hosts in the local network ([#2393], [#2961]). - The ability to serve DNS queries on multiple hosts and interfaces ([#1401]). - `ips` and `text` DHCP server options ([#2385]). - `SRV` records support in `$dnsrewrite` filters ([#2533]). ### Changed - Our DoQ implementation is now updated to conform to the latest standard [draft][doq-draft-02] ([#2843]). - Quality of logging ([#2954]). - Normalization of hostnames sent by DHCP clients ([#2945], [#2952]). - The access to the private hosts is now forbidden for users from external networks ([#2889]). - The reverse lookup for local addresses is now performed via local resolvers ([#2704]). - Stricter validation of the IP addresses of static leases in the DHCP server with regards to the netmask ([#2838]). - Stricter validation of `$dnsrewrite` filter modifier parameters ([#2498]). - New, more correct versioning scheme ([#2412]). ### Deprecated - Go 1.15 support. v0.107.0 will require at least Go 1.16 to build. ### Fixed - Multiple answers for `$dnsrewrite` rule matching requests with repeating patterns in it ([#2981]). - Root server resolving when custom upstreams for hosts are specified ([#2994]). - Inconsistent resolving of DHCP clients when the DHCP server is disabled ([#2934]). - Comment handling in clients' custom upstreams ([#2947]). - Overwriting of DHCPv4 options when using the HTTP API ([#2927]). - Assumption that MAC addresses always have the length of 6 octets ([#2828]). - Support for more than one `/24` subnet in DHCP ([#2541]). - Invalid filenames in the `mobileconfig` API responses ([#2835]). ### Removed - Go 1.14 support. [#1273]: https://github.com/AdguardTeam/AdGuardHome/issues/1273 [#1401]: https://github.com/AdguardTeam/AdGuardHome/issues/1401 [#1947]: https://github.com/AdguardTeam/AdGuardHome/issues/1947 [#2385]: https://github.com/AdguardTeam/AdGuardHome/issues/2385 [#2393]: https://github.com/AdguardTeam/AdGuardHome/issues/2393 [#2412]: https://github.com/AdguardTeam/AdGuardHome/issues/2412 [#2416]: https://github.com/AdguardTeam/AdGuardHome/issues/2416 [#2498]: https://github.com/AdguardTeam/AdGuardHome/issues/2498 [#2533]: https://github.com/AdguardTeam/AdGuardHome/issues/2533 [#2541]: https://github.com/AdguardTeam/AdGuardHome/issues/2541 [#2704]: https://github.com/AdguardTeam/AdGuardHome/issues/2704 [#2723]: https://github.com/AdguardTeam/AdGuardHome/issues/2723 [#2824]: https://github.com/AdguardTeam/AdGuardHome/issues/2824 [#2826]: https://github.com/AdguardTeam/AdGuardHome/issues/2826 [#2828]: https://github.com/AdguardTeam/AdGuardHome/issues/2828 [#2835]: https://github.com/AdguardTeam/AdGuardHome/issues/2835 [#2838]: https://github.com/AdguardTeam/AdGuardHome/issues/2838 [#2843]: https://github.com/AdguardTeam/AdGuardHome/issues/2843 [#2889]: https://github.com/AdguardTeam/AdGuardHome/issues/2889 [#2923]: https://github.com/AdguardTeam/AdGuardHome/issues/2923 [#2927]: https://github.com/AdguardTeam/AdGuardHome/issues/2927 [#2934]: https://github.com/AdguardTeam/AdGuardHome/issues/2934 [#2945]: https://github.com/AdguardTeam/AdGuardHome/issues/2945 [#2947]: https://github.com/AdguardTeam/AdGuardHome/issues/2947 [#2952]: https://github.com/AdguardTeam/AdGuardHome/issues/2952 [#2954]: https://github.com/AdguardTeam/AdGuardHome/issues/2954 [#2961]: https://github.com/AdguardTeam/AdGuardHome/issues/2961 [#2981]: https://github.com/AdguardTeam/AdGuardHome/issues/2981 [#2994]: https://github.com/AdguardTeam/AdGuardHome/issues/2994 [doq-draft-02]: https://tools.ietf.org/html/draft-ietf-dprive-dnsoquic-02 [ms-v0.106.0]: https://github.com/AdguardTeam/AdGuardHome/milestone/26?closed=1 ## [v0.105.2] - 2021-03-10 See also the [v0.105.2 GitHub milestone][ms-v0.105.2]. ### Fixed - Incomplete hostnames with trailing zero-bytes handling ([#2582]). - Wrong DNS-over-TLS ALPN configuration ([#2681]). - Inconsistent responses for messages with EDNS0 and AD when DNS caching is enabled ([#2600]). - Incomplete OpenWrt detection ([#2757]). - DHCP lease's `expired` field incorrect time format ([#2692]). - Incomplete DNS upstreams validation ([#2674]). - Wrong parsing of DHCP options of the `ip` type ([#2688]). ### Security - Session token doesn't contain user's information anymore ([#2470]). [#2470]: https://github.com/AdguardTeam/AdGuardHome/issues/2470 [#2582]: https://github.com/AdguardTeam/AdGuardHome/issues/2582 [#2600]: https://github.com/AdguardTeam/AdGuardHome/issues/2600 [#2674]: https://github.com/AdguardTeam/AdGuardHome/issues/2674 [#2681]: https://github.com/AdguardTeam/AdGuardHome/issues/2681 [#2688]: https://github.com/AdguardTeam/AdGuardHome/issues/2688 [#2692]: https://github.com/AdguardTeam/AdGuardHome/issues/2692 [#2757]: https://github.com/AdguardTeam/AdGuardHome/issues/2757 [ms-v0.105.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/32?closed=1 ## [v0.105.1] - 2021-02-15 See also the [v0.105.1 GitHub milestone][ms-v0.105.1]. ### Changed - Increased HTTP API timeouts ([#2671], [#2682]). - "Permission denied" errors when checking if the machine has a static IP no longer prevent the DHCP server from starting ([#2667]). - The server name sent by clients of TLS APIs is not only checked when `strict_sni_check` is enabled ([#2664]). - HTTP API request body size limit for the `POST /control/access/set` and `POST /control/filtering/set_rules` HTTP APIs is increased ([#2666], [#2675]). ### Fixed - Error when enabling the DHCP server when AdGuard Home couldn't determine if the machine has a static IP. - Optical issue on custom rules ([#2641]). - Occasional crashes during startup. - The field `"range_start"` in the `GET /control/dhcp/status` HTTP API response is now correctly named again ([#2678]). - DHCPv6 server's `ra_slaac_only` and `ra_allow_slaac` settings aren't reset to `false` on update anymore ([#2653]). - The `Vary` header is now added along with `Access-Control-Allow-Origin` to prevent cache-related and other issues in browsers ([#2658]). - The request body size limit is now set for HTTPS requests as well. - Incorrect version tag in the Docker release ([#2663]). - DNSCrypt queries weren't marked as such in logs ([#2662]). [#2641]: https://github.com/AdguardTeam/AdGuardHome/issues/2641 [#2653]: https://github.com/AdguardTeam/AdGuardHome/issues/2653 [#2658]: https://github.com/AdguardTeam/AdGuardHome/issues/2658 [#2662]: https://github.com/AdguardTeam/AdGuardHome/issues/2662 [#2663]: https://github.com/AdguardTeam/AdGuardHome/issues/2663 [#2664]: https://github.com/AdguardTeam/AdGuardHome/issues/2664 [#2666]: https://github.com/AdguardTeam/AdGuardHome/issues/2666 [#2667]: https://github.com/AdguardTeam/AdGuardHome/issues/2667 [#2671]: https://github.com/AdguardTeam/AdGuardHome/issues/2671 [#2675]: https://github.com/AdguardTeam/AdGuardHome/issues/2675 [#2678]: https://github.com/AdguardTeam/AdGuardHome/issues/2678 [#2682]: https://github.com/AdguardTeam/AdGuardHome/issues/2682 [ms-v0.105.1]: https://github.com/AdguardTeam/AdGuardHome/milestone/31?closed=1 ## [v0.105.0] - 2021-02-10 See also the [v0.105.0 GitHub milestone][ms-v0.105.0]. ### Added - Added more services to the "Blocked services" list ([#2224], [#2401]). - `ipset` subdomain matching, just like `dnsmasq` does ([#2179]). - ClientID support for DNS-over-HTTPS, DNS-over-QUIC, and DNS-over-TLS ([#1383]). - `$dnsrewrite` modifier for filters ([#2102]). - The host checking API and the query logs API can now return multiple matched rules ([#2102]). - Detecting of network interface configured to have static IP address via `/etc/network/interfaces` ([#2302]). - DNSCrypt protocol support ([#1361]). - A 5 second wait period until a DHCP server's network interface gets an IP address ([#2304]). - `$dnstype` modifier for filters ([#2337]). - HTTP API request body size limit ([#2305]). ### Changed - `Access-Control-Allow-Origin` is now only set to the same origin as the domain, but with an HTTP scheme as opposed to `*` ([#2484]). - `workDir` now supports symlinks. - Stopped mounting together the directories `/opt/adguardhome/conf` and `/opt/adguardhome/work` in our Docker images ([#2589]). - When `dns.bogus_nxdomain` option is used, the server will now transform responses if there is at least one bogus address instead of all of them ([#2394]). The new behavior is the same as in `dnsmasq`. - Post-updating relaunch possibility is now determined OS-dependently ([#2231], [#2391]). - Made the mobileconfig HTTP API more robust and predictable, add parameters and improve error response ([#2358]). - Improved HTTP requests handling and timeouts ([#2343]). - Our snap package now uses the `core20` image as its base ([#2306]). - New build system and various internal improvements ([#2271], [#2276], [#2297], [#2509], [#2552], [#2639], [#2646]). ### Deprecated - Go 1.14 support. v0.106.0 will require at least Go 1.15 to build. - The `darwin/386` port. It will be removed in v0.106.0. - The `"rule"` and `"filter_id"` fields in `GET /filtering/check_host` and `GET /querylog` responses. They will be removed in v0.106.0 ([#2102]). ### Fixed - Autoupdate bug in the Darwin (macOS) version ([#2630]). - Unnecessary conversions from `string` to `net.IP`, and vice versa ([#2508]). - Inability to set DNS cache TTL limits ([#2459]). - Possible freezes on slower machines ([#2225]). - A mitigation against records being shown in the wrong order on the query log page ([#2293]). - A JSON parsing error in query log ([#2345]). - Incorrect detection of the IPv6 address of an interface as well as another infinite loop in the `/dhcp/find_active_dhcp` HTTP API ([#2355]). ### Removed - The undocumented ability to use hostnames as any of `bind_host` values in configuration. Documentation requires them to be valid IP addresses, and now the implementation makes sure that that is the case ([#2508]). - `Dockerfile` ([#2276]). Replaced with the script `scripts/make/build-docker.sh` which uses `scripts/make/Dockerfile`. - Support for pre-v0.99.3 format of query logs ([#2102]). [#1361]: https://github.com/AdguardTeam/AdGuardHome/issues/1361 [#1383]: https://github.com/AdguardTeam/AdGuardHome/issues/1383 [#2102]: https://github.com/AdguardTeam/AdGuardHome/issues/2102 [#2179]: https://github.com/AdguardTeam/AdGuardHome/issues/2179 [#2224]: https://github.com/AdguardTeam/AdGuardHome/issues/2224 [#2225]: https://github.com/AdguardTeam/AdGuardHome/issues/2225 [#2231]: https://github.com/AdguardTeam/AdGuardHome/issues/2231 [#2271]: https://github.com/AdguardTeam/AdGuardHome/issues/2271 [#2276]: https://github.com/AdguardTeam/AdGuardHome/issues/2276 [#2293]: https://github.com/AdguardTeam/AdGuardHome/issues/2293 [#2297]: https://github.com/AdguardTeam/AdGuardHome/issues/2297 [#2302]: https://github.com/AdguardTeam/AdGuardHome/issues/2302 [#2304]: https://github.com/AdguardTeam/AdGuardHome/issues/2304 [#2305]: https://github.com/AdguardTeam/AdGuardHome/issues/2305 [#2306]: https://github.com/AdguardTeam/AdGuardHome/issues/2306 [#2337]: https://github.com/AdguardTeam/AdGuardHome/issues/2337 [#2343]: https://github.com/AdguardTeam/AdGuardHome/issues/2343 [#2345]: https://github.com/AdguardTeam/AdGuardHome/issues/2345 [#2355]: https://github.com/AdguardTeam/AdGuardHome/issues/2355 [#2358]: https://github.com/AdguardTeam/AdGuardHome/issues/2358 [#2391]: https://github.com/AdguardTeam/AdGuardHome/issues/2391 [#2394]: https://github.com/AdguardTeam/AdGuardHome/issues/2394 [#2401]: https://github.com/AdguardTeam/AdGuardHome/issues/2401 [#2459]: https://github.com/AdguardTeam/AdGuardHome/issues/2459 [#2484]: https://github.com/AdguardTeam/AdGuardHome/issues/2484 [#2508]: https://github.com/AdguardTeam/AdGuardHome/issues/2508 [#2509]: https://github.com/AdguardTeam/AdGuardHome/issues/2509 [#2552]: https://github.com/AdguardTeam/AdGuardHome/issues/2552 [#2589]: https://github.com/AdguardTeam/AdGuardHome/issues/2589 [#2630]: https://github.com/AdguardTeam/AdGuardHome/issues/2630 [#2639]: https://github.com/AdguardTeam/AdGuardHome/issues/2639 [#2646]: https://github.com/AdguardTeam/AdGuardHome/issues/2646 [ms-v0.105.0]: https://github.com/AdguardTeam/AdGuardHome/milestone/27?closed=1 ## [v0.104.3] - 2020-11-19 See also the [v0.104.3 GitHub milestone][ms-v0.104.3]. ### Fixed - The accidentally exposed profiler HTTP API ([#2336]). [#2336]: https://github.com/AdguardTeam/AdGuardHome/issues/2336 [ms-v0.104.3]: https://github.com/AdguardTeam/AdGuardHome/milestone/30?closed=1 ## [v0.104.2] - 2020-11-19 See also the [v0.104.2 GitHub milestone][ms-v0.104.2]. ### Added - This changelog :-) ([#2294]). - `HACKING.md`, a guide for developers. ### Changed - Improved tests output ([#2273]). ### Fixed - Query logs from file not loading after the ones buffered in memory ([#2325]). - Unnecessary errors in query logs when switching between log files ([#2324]). - `404 Not Found` errors on the DHCP settings page on Windows. The page now correctly shows that DHCP is not currently available on that OS ([#2295]). - Infinite loop in `/dhcp/find_active_dhcp` ([#2301]). [#2273]: https://github.com/AdguardTeam/AdGuardHome/issues/2273 [#2294]: https://github.com/AdguardTeam/AdGuardHome/issues/2294 [#2295]: https://github.com/AdguardTeam/AdGuardHome/issues/2295 [#2301]: https://github.com/AdguardTeam/AdGuardHome/issues/2301 [#2324]: https://github.com/AdguardTeam/AdGuardHome/issues/2324 [#2325]: https://github.com/AdguardTeam/AdGuardHome/issues/2325 [ms-v0.104.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/28?closed=1 [Unreleased]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.3...HEAD [v0.107.3]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.2...v0.107.3 [v0.107.2]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.1...v0.107.2 [v0.107.1]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.0...v0.107.1 [v0.107.0]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.3...v0.107.0 [v0.106.3]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.2...v0.106.3 [v0.106.2]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.1...v0.106.2 [v0.106.1]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.0...v0.106.1 [v0.106.0]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.105.2...v0.106.0 [v0.105.2]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.105.1...v0.105.2 [v0.105.1]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.105.0...v0.105.1 [v0.105.0]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.104.3...v0.105.0 [v0.104.3]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.104.2...v0.104.3 [v0.104.2]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.104.1...v0.104.2