65 lines
1.8 KiB
Markdown
65 lines
1.8 KiB
Markdown
# DHCP server
|
|
|
|
Contents:
|
|
* [Test setup with Virtual Box](#vbox)
|
|
|
|
<a id="vbox"></a>
|
|
## Test setup with Virtual Box
|
|
|
|
To set up a test environment for DHCP server you need:
|
|
|
|
* Linux host machine
|
|
* Virtual Box
|
|
* Virtual machine (guest OS doesn't matter)
|
|
|
|
### Configure client
|
|
|
|
1. Install Virtual Box and run the following command to create a Host-Only network:
|
|
|
|
$ VBoxManage hostonlyif create
|
|
|
|
You can check its status by `ip a` command.
|
|
|
|
You can also set up Host-Only network using Virtual Box menu:
|
|
|
|
File -> Host Network Manager...
|
|
|
|
2. Create your virtual machine and set up its network:
|
|
|
|
VM Settings -> Network -> Host-only Adapter
|
|
|
|
3. Start your VM, install an OS. Configure your network interface to use DHCP and the OS should ask for a IP address from our DHCP server.
|
|
|
|
4. To see the current IP address on client OS you can use `ip a` command on Linux or `ipconfig` on Windows.
|
|
|
|
5. To force the client OS to request an IP from DHCP server again, you can use `dhclient` on Linux or `ipconfig /release` on Windows.
|
|
|
|
### Configure server
|
|
|
|
1. Edit server configuration file 'AdGuardHome.yaml', for example:
|
|
|
|
dhcp:
|
|
enabled: true
|
|
interface_name: vboxnet0
|
|
dhcpv4:
|
|
gateway_ip: 192.168.56.1
|
|
subnet_mask: 255.255.255.0
|
|
range_start: 192.168.56.2
|
|
range_end: 192.168.56.2
|
|
lease_duration: 86400
|
|
icmp_timeout_msec: 1000
|
|
options: []
|
|
dhcpv6:
|
|
range_start: 2001::1
|
|
lease_duration: 86400
|
|
ra_slaac_only: false
|
|
ra_allow_slaac: false
|
|
|
|
2. Start the server
|
|
|
|
./AdGuardHome
|
|
|
|
There should be a message in log which shows that DHCP server is ready:
|
|
|
|
[info] DHCP: listening on 0.0.0.0:67
|