a
/
code-server-2
mirror of https://git.tuxpa.in/a/code-server.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
code-server-2/doc/cros-install.md

76 lines
3.1 KiB
Markdown
Raw Normal View History

Make flags additive and clean up docs This means that you have to turn on features now instead of disabling them like auth and https. In addition: - Allow multiple options for auth (only password for now). - Combine the install docs since they had many commonalities and - generally simplified them (hopefully not too much). - Move all example configs into docs/examples.
2019-07-23 20:38:00 +00:00
# Installing code-server in your ChromiumOS/ChromeOS/CloudReady machine
This guide will show you how to install code-server into your CrOS machine.
## Using Crostini
One of the easier ways to run code-server is via
[Crostini](https://www.aboutchromebooks.com/tag/project-crostini/), the Linux
apps support feature in CrOS. Make sure you have enough RAM, HDD space and your
CPU has VT-x/ AMD-V support. If your chromebook has this, then you are
qualified to use Crostini.
If you are running R69, you might want to enable this on
[Chrome Flags](chrome://flags/#enable-experimental-crostini-ui).
If you run R72, however, this is already enabled for you.
After checking your prerequisites, follow the steps in [the self-host install guide](index.md)
on installing code-server. Once done, make sure code-server works by running
Change default port to 8080
2019-08-08 16:21:45 +00:00
it. After running it, simply go to `penguin.linux.test:8080` to access
Make flags additive and clean up docs This means that you have to turn on features now instead of disabling them like auth and https. In addition: - Allow multiple options for auth (only password for now). - Combine the install docs since they had many commonalities and - generally simplified them (hopefully not too much). - Move all example configs into docs/examples.
2019-07-23 20:38:00 +00:00
code-server. Now you should be greeted with this screen. If you did,
congratulations, you have installed code-server in your Chromebook!
![code-server on Chromebook](assets/cros.png)
Alternatively, if you ran code-server in another container and you need the IP
for that specific container, simply go to Termina's shell via `crosh` and type
`vsh termina`.
```bash
Loading extra module: /usr/share/crosh/dev.d/50-crosh.sh
Welcome to crosh, the Chrome OS developer shell.
If you got here by mistake, don't panic! Just close this tab and carry on.
Type 'help' for a list of commands.
If you want to customize the look/behavior, you can use the options page.
Load it by using the Ctrl+Shift+P keyboard shortcut.
crosh> vsh termina
(termina) chronos@localhost ~ $
```
While in termina, run `lxc list`. It should output the list of running containers.
```bash
(termina) chronos@localhost ~ $ lxc list
+---------|---------|-----------------------|------|------------|-----------+
| NAME | STATE | IPV4 | IPV6 | TYPE | SNAPSHOTS |
+---------|---------|-----------------------|------|------------|-----------+
| penguin | RUNNING | 100.115.92.199 (eth0) | | PERSISTENT | 0 |
+---------|---------|-----------------------|------|------------|-----------+
(termina) chronos@localhost ~ $
```
For this example, we show the default `penguin` container, which is exposed on
`eth0` at 100.115.92.199. Simply enter the IP of the container where the
code-server runs to Chrome.
## Using Crouton
[Crouton](https://github.com/dnschneid/crouton) is one of the old ways to get a
running full Linux via `chroot` on a Chromebook. To use crouton, enable
developer mode and go to `crosh`. This time, run `shell`, which should drop you
to `bash`.
Make sure you downloaded `crouton`, if so, go ahead and run it under
`~/Downloads`. After installing your chroot container via crouton, go ahead and
enter `enter-chroot` to enter your container.
Follow the instructions set in [the self-host install guide](index.md) to
install code-server. After that is done, run `code-server` and verify it works
Change default port to 8080
2019-08-08 16:21:45 +00:00
by going to `localhost:8080`.
Make flags additive and clean up docs This means that you have to turn on features now instead of disabling them like auth and https. In addition: - Allow multiple options for auth (only password for now). - Combine the install docs since they had many commonalities and - generally simplified them (hopefully not too much). - Move all example configs into docs/examples.
2019-07-23 20:38:00 +00:00
> At this point in writing, `localhost` seems to work in this method. However,
> the author is not sure if it applies still to newer Chromebooks.