676 lines
15 KiB
Markdown
676 lines
15 KiB
Markdown
# AdGuard Home Technical Document
|
|
|
|
The document describes technical details and internal algorithms of AdGuard Home.
|
|
|
|
Contents:
|
|
* First startup
|
|
* Installation wizard
|
|
* "Get install settings" command
|
|
* "Check configuration" command
|
|
* Disable DNSStubListener
|
|
* "Apply configuration" command
|
|
* Updating
|
|
* Get version command
|
|
* Update command
|
|
* Device Names and Per-client Settings
|
|
* Per-client settings
|
|
* Get list of clients
|
|
* Add client
|
|
* Update client
|
|
* Delete client
|
|
* Enable DHCP server
|
|
* "Show DHCP status" command
|
|
* "Check DHCP" command
|
|
* "Enable DHCP" command
|
|
* Static IP check/set
|
|
* Add a static lease
|
|
* DNS access settings
|
|
* List access settings
|
|
* Set access settings
|
|
|
|
|
|
## First startup
|
|
|
|
The first application startup is detected when there's no .yaml configuration file.
|
|
|
|
We check if the user is root, otherwise we fail with an error.
|
|
|
|
Web server is started up on port 3000 and automatically redirects requests to `/` to Installation wizard.
|
|
|
|
After Installation wizard steps are completed, we write configuration to a file and start normal operation.
|
|
|
|
|
|
## Installation wizard
|
|
|
|
This is the collection of UI screens that are shown to a user on first application startup.
|
|
|
|
The screens are:
|
|
|
|
1. Welcome
|
|
2. Set up network interface and listening ports for Web and DNS servers
|
|
3. Set up administrator username and password
|
|
4. Configuration complete
|
|
5. Done
|
|
|
|
Algorithm:
|
|
|
|
Screen 2:
|
|
* UI asks server for initial information and shows it
|
|
* User edits the default settings, clicks on "Next" button
|
|
* UI asks server to check new settings
|
|
* Server searches for the known issues
|
|
* UI shows information about the known issues and the means to fix them
|
|
* Server applies automatic fixes of the known issues on command from UI
|
|
|
|
Screen 3:
|
|
* UI asks server to apply the configuration
|
|
* Server restarts DNS server
|
|
|
|
|
|
### "Get install settings" command
|
|
|
|
Request:
|
|
|
|
GET /control/install/get_addresses
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
{
|
|
"web_port":80,
|
|
"dns_port":53,
|
|
"interfaces":{
|
|
"enp2s0":{"name":"enp2s0","mtu":1500,"hardware_address":"","ip_addresses":["",""],"flags":"up|broadcast|multicast"},
|
|
"lo":{"name":"lo","mtu":65536,"hardware_address":"","ip_addresses":["127.0.0.1","::1"],"flags":"up|loopback"},
|
|
}
|
|
}
|
|
|
|
If `interfaces.flags` doesn't contain `up` flag, UI must show `(Down)` status next to its IP address in interfaces selector.
|
|
|
|
|
|
### "Check configuration" command
|
|
|
|
Request:
|
|
|
|
POST /control/install/check_config
|
|
|
|
{
|
|
"web":{"port":80,"ip":"192.168.11.33"},
|
|
"dns":{"port":53,"ip":"127.0.0.1","autofix":false},
|
|
}
|
|
|
|
Server should check whether a port is available only in case it itself isn't already listening on that port.
|
|
|
|
Server replies on success:
|
|
|
|
200 OK
|
|
|
|
{
|
|
"web":{"status":""},
|
|
"dns":{"status":""},
|
|
}
|
|
|
|
Server replies on error:
|
|
|
|
200 OK
|
|
|
|
{
|
|
"web":{"status":"ERROR MESSAGE"},
|
|
"dns":{"status":"ERROR MESSAGE", "can_autofix": true|false},
|
|
}
|
|
|
|
|
|
### Disable DNSStubListener
|
|
|
|
On Linux, if 53 port is not available, server performs several additional checks to determine if the issue can be fixed automatically.
|
|
|
|
#### Phase 1
|
|
|
|
Request:
|
|
|
|
POST /control/install/check_config
|
|
|
|
{
|
|
"dns":{"port":53,"ip":"127.0.0.1","autofix":false}
|
|
}
|
|
|
|
Check if DNSStubListener is enabled:
|
|
|
|
systemctl is-enabled systemd-resolved
|
|
|
|
Check if DNSStubListener is active:
|
|
|
|
grep -E '#?DNSStubListener=yes' /etc/systemd/resolved.conf
|
|
|
|
If the issue can be fixed automatically, server replies with `"can_autofix":true`
|
|
|
|
200 OK
|
|
|
|
{
|
|
"dns":{"status":"ERROR MESSAGE", "can_autofix":true},
|
|
}
|
|
|
|
In this case UI shows "Fix" button next to error message.
|
|
|
|
#### Phase 2
|
|
|
|
If user clicks on "Fix" button, UI sends request to perform an automatic fix
|
|
|
|
POST /control/install/check_config
|
|
|
|
{
|
|
"dns":{"port":53,"ip":"127.0.0.1","autofix":true},
|
|
}
|
|
|
|
Deactivate (save backup as `resolved.conf.orig`) and stop DNSStubListener:
|
|
|
|
sed -r -i.orig 's/#?DNSStubListener=yes/DNSStubListener=no/g' /etc/systemd/resolved.conf
|
|
systemctl reload-or-restart systemd-resolved
|
|
|
|
Server replies:
|
|
|
|
200 OK
|
|
|
|
{
|
|
"dns":{"status":""},
|
|
}
|
|
|
|
|
|
### "Apply configuration" command
|
|
|
|
Request:
|
|
|
|
POST /control/install/configure
|
|
|
|
{
|
|
"web":{"port":80,"ip":"192.168.11.33"},
|
|
"dns":{"port":53,"ip":"127.0.0.1"},
|
|
"username":"u",
|
|
"password":"p",
|
|
}
|
|
|
|
Server checks the parameters once again, restarts DNS server, replies:
|
|
|
|
200 OK
|
|
|
|
On error, server responds with code 400 or 500. In this case UI should show error message and reset to the beginning.
|
|
|
|
400 Bad Request
|
|
|
|
ERROR MESSAGE
|
|
|
|
|
|
## Updating
|
|
|
|
Algorithm of an update by command:
|
|
|
|
* UI requests the latest version information from Server
|
|
* Server requests information from Internet; stores the data in cache for several hours; sends data to UI
|
|
* If UI sees that a new version is available, it shows notification message and "Update Now" button
|
|
* When user clicks on "Update Now" button, UI sends Update command to Server
|
|
* UI shows "Please wait, AGH is being updated..." message
|
|
* Server performs an update:
|
|
* Use working directory from `--work-dir` if necessary
|
|
* Download new package for the current OS and CPU
|
|
* Unpack the package to a temporary directory `update-vXXX`
|
|
* Copy the current configuration file to the directory we unpacked new AGH to
|
|
* Check configuration compatibility by executing `./AGH --check-config`. If this command fails, we won't be able to update.
|
|
* Create `backup-vXXX` directory and copy the current configuration file there
|
|
* Stop all tasks, including DNS server, DHCP server, HTTP server
|
|
* Move the current binary file to backup directory
|
|
* Note: if power fails here, AGH won't be able to start at system boot. Administrator has to fix it manually
|
|
* Move new binary file to the current directory
|
|
* If AGH is running as a service, use service control functionality to restart
|
|
* If AGH is not running as a service, use the current process arguments to start a new process
|
|
* Exit process
|
|
* UI resends Get Status command until Server responds to it with the new version. This means that Server is successfully restarted after update.
|
|
* UI reloads itself
|
|
|
|
|
|
### Get version command
|
|
|
|
On receiving this request server downloads version.json data from github and stores it in cache for several hours.
|
|
|
|
Example of version.json data:
|
|
|
|
{
|
|
"version": "v0.95-hotfix",
|
|
"announcement": "AdGuard Home v0.95-hotfix is now available!",
|
|
"announcement_url": "",
|
|
"download_windows_amd64": "",
|
|
"download_windows_386": "",
|
|
"download_darwin_amd64": "",
|
|
"download_linux_amd64": "",
|
|
"download_linux_386": "",
|
|
"download_linux_arm": "",
|
|
"download_linux_arm64": "",
|
|
"download_linux_mips": "",
|
|
"download_linux_mipsle": "",
|
|
"selfupdate_min_version": "v0.0"
|
|
}
|
|
|
|
Request:
|
|
|
|
GET /control/version.json
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
{
|
|
"new_version": "v0.95",
|
|
"announcement": "AdGuard Home v0.95 is now available!",
|
|
"announcement_url": "http://...",
|
|
"can_autoupdate": true
|
|
}
|
|
|
|
If `can_autoupdate` is true, then the server can automatically upgrade to a new version.
|
|
|
|
Response with empty body:
|
|
|
|
200 OK
|
|
|
|
It means that update check is disabled by user. UI should do nothing.
|
|
|
|
|
|
### Update command
|
|
|
|
Perform an update procedure to the latest available version
|
|
|
|
Request:
|
|
|
|
POST /control/update
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
Error response:
|
|
|
|
500
|
|
|
|
UI shows error message "Auto-update has failed"
|
|
|
|
|
|
## Enable DHCP server
|
|
|
|
Algorithm:
|
|
|
|
* UI shows DHCP configuration screen with "Enabled DHCP" button disabled, and "Check DHCP" button enabled
|
|
* User clicks on "Check DHCP"; UI sends request to server
|
|
* Server may fail to detect whether there is another DHCP server working in the network. In this case UI shows a warning.
|
|
* Server may detect that a dynamic IP configuration is used for this interface. In this case UI shows a warning.
|
|
* UI enables "Enable DHCP" button
|
|
* User clicks on "Enable DHCP"; UI sends request to server
|
|
* Server sets a static IP (if necessary), enables DHCP server, sends the status back to UI
|
|
* UI shows the status
|
|
|
|
|
|
### "Show DHCP status" command
|
|
|
|
Request:
|
|
|
|
GET /control/dhcp/status
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
{
|
|
"config":{
|
|
"enabled":false,
|
|
"interface_name":"...",
|
|
"gateway_ip":"...",
|
|
"subnet_mask":"...",
|
|
"range_start":"...",
|
|
"range_end":"...",
|
|
"lease_duration":60,
|
|
"icmp_timeout_msec":0
|
|
},
|
|
"leases":[
|
|
{"ip":"...","mac":"...","hostname":"...","expires":"..."}
|
|
...
|
|
],
|
|
"static_leases":[
|
|
{"ip":"...","mac":"...","hostname":"..."}
|
|
...
|
|
]
|
|
}
|
|
|
|
|
|
### "Check DHCP" command
|
|
|
|
Request:
|
|
|
|
POST /control/dhcp/find_active_dhcp
|
|
|
|
vboxnet0
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
{
|
|
"other_server": {
|
|
"found": "yes|no|error",
|
|
"error": "Error message", // set if found=error
|
|
},
|
|
"static_ip": {
|
|
"static": "yes|no|error",
|
|
"ip": "<Current dynamic IP address>", // set if static=no
|
|
}
|
|
}
|
|
|
|
If `other_server.found` is:
|
|
* `no`: everything is fine - there is no other DHCP server
|
|
* `yes`: we found another DHCP server. UI shows a warning.
|
|
* `error`: we failed to determine whether there's another DHCP server. `other_server.error` contains error details. UI shows a warning.
|
|
|
|
If `static_ip.static` is:
|
|
* `yes`: everything is fine - server uses static IP address.
|
|
|
|
* `no`: `static_ip.ip` contains the current dynamic IP address which we may set as static. In this case UI shows a warning:
|
|
|
|
Your system uses dynamic IP address configuration for interface <CURRENT INTERFACE NAME>. In order to use DHCP server a static IP address must be set. Your current IP address is <static_ip.ip>. We will automatically set this IP address as static if you press Enable DHCP button.
|
|
|
|
* `error`: this means that the server failed to check for a static IP. In this case UI shows a warning:
|
|
|
|
In order to use DHCP server a static IP address must be set. We failed to determine if this network interface is configured using static IP address. Please set a static IP address manually.
|
|
|
|
|
|
### "Enable DHCP" command
|
|
|
|
Request:
|
|
|
|
POST /control/dhcp/set_config
|
|
|
|
{
|
|
"enabled":true,
|
|
"interface_name":"vboxnet0",
|
|
"gateway_ip":"192.169.56.1",
|
|
"subnet_mask":"255.255.255.0",
|
|
"range_start":"192.169.56.3",
|
|
"range_end":"192.169.56.3",
|
|
"lease_duration":60,
|
|
"icmp_timeout_msec":0
|
|
}
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
OK
|
|
|
|
|
|
### Static IP check/set
|
|
|
|
Before enabling DHCP server we have to make sure the network interface we use has a static IP configured.
|
|
|
|
#### Phase 1
|
|
|
|
On Debian systems DHCP is configured by `/etc/dhcpcd.conf`.
|
|
|
|
To detect if a static IP is used currently we search for line
|
|
|
|
interface eth0
|
|
|
|
and then look for line
|
|
|
|
static ip_address=...
|
|
|
|
If the interface already has a static IP, everything is set up, we don't have to change anything.
|
|
|
|
To get the current IP address along with netmask we execute
|
|
|
|
ip -oneline -family inet address show eth0
|
|
|
|
which will print:
|
|
|
|
2: eth0 inet 192.168.0.1/24 brd 192.168.0.255 scope global eth0\ valid_lft forever preferred_lft forever
|
|
|
|
To get the current gateway address:
|
|
|
|
ip route show dev enp2s0
|
|
|
|
which will print:
|
|
|
|
default via 192.168.0.1 proto dhcp metric 100
|
|
|
|
|
|
#### Phase 2
|
|
|
|
This method only works on Raspbian.
|
|
|
|
On Ubuntu DHCP for a network interface can't be disabled via `dhcpcd.conf`. This must be configured in `/etc/netplan/01-netcfg.yaml`.
|
|
|
|
Fedora doesn't use `dhcpcd.conf` configuration at all.
|
|
|
|
Step 1.
|
|
|
|
To set a static IP address we add these lines to `dhcpcd.conf`:
|
|
|
|
interface eth0
|
|
static ip_address=192.168.0.1/24
|
|
static routers=192.168.0.1
|
|
static domain_name_servers=192.168.0.1
|
|
|
|
* Don't set 'routers' if we couldn't find gateway IP
|
|
* Set 'domain_name_servers' equal to our IP
|
|
|
|
Step 2.
|
|
|
|
If we would set a different IP address, we'd need to replace the IP address for the current network configuration. But currently this step isn't necessary.
|
|
|
|
ip addr replace dev eth0 192.168.0.1/24
|
|
|
|
|
|
### Add a static lease
|
|
|
|
Request:
|
|
|
|
POST /control/dhcp/add_static_lease
|
|
|
|
{
|
|
"mac":"...",
|
|
"ip":"...",
|
|
"hostname":"..."
|
|
}
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
|
|
### Remove a static lease
|
|
|
|
Request:
|
|
|
|
POST /control/dhcp/remove_static_lease
|
|
|
|
{
|
|
"mac":"...",
|
|
"ip":"...",
|
|
"hostname":"..."
|
|
}
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
|
|
## Device Names and Per-client Settings
|
|
|
|
When a client requests information from DNS server, he's identified by IP address.
|
|
Administrator can set a name for a client with a known IP and also override global settings for this client. The name is used to improve readability of DNS logs: client's name is shown in UI next to its IP address. The names are loaded from 3 sources:
|
|
* automatically from "/etc/hosts" file. It's a list of `IP<->Name` entries which is loaded once on AGH startup from "/etc/hosts" file.
|
|
* automatically using rDNS. It's a list of `IP<->Name` entries which is added in runtime using rDNS mechanism when a client first makes a DNS request.
|
|
* manually configured via UI. It's a list of client's names and their settings which is loaded from configuration file and stored on disk.
|
|
|
|
### Per-client settings
|
|
|
|
UI provides means to manage the list of known clients (List/Add/Update/Delete) and their settings. These settings are stored in configuration file as an array of objects.
|
|
|
|
Notes:
|
|
|
|
* `name`, `ip` and `mac` values are unique.
|
|
|
|
* `ip` & `mac` values can't be set both at the same time.
|
|
|
|
* If `mac` is set and DHCP server is enabled, IP is taken from DHCP lease table.
|
|
|
|
* If `use_global_settings` is true, then DNS responses for this client are processed and filtered using global settings.
|
|
|
|
* If `use_global_settings` is false, then the client-specific settings are used to override (disable) global settings. For example, if global setting `parental_enabled` is true, then per-client setting `parental_enabled:false` can disable Parental Control for this specific client.
|
|
|
|
|
|
### Get list of clients
|
|
|
|
Request:
|
|
|
|
GET /control/clients
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
{
|
|
clients: [
|
|
{
|
|
name: "client1"
|
|
ip: "..."
|
|
mac: "..."
|
|
use_global_settings: true
|
|
filtering_enabled: false
|
|
parental_enabled: false
|
|
safebrowsing_enabled: false
|
|
safesearch_enabled: false
|
|
}
|
|
]
|
|
auto_clients: [
|
|
{
|
|
name: "host"
|
|
ip: "..."
|
|
source: "etc/hosts" || "rDNS"
|
|
}
|
|
]
|
|
}
|
|
|
|
|
|
### Add client
|
|
|
|
Request:
|
|
|
|
POST /control/clients/add
|
|
|
|
{
|
|
name: "client1"
|
|
ip: "..."
|
|
mac: "..."
|
|
use_global_settings: true
|
|
filtering_enabled: false
|
|
parental_enabled: false
|
|
safebrowsing_enabled: false
|
|
safesearch_enabled: false
|
|
}
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
Error response (Client already exists):
|
|
|
|
400
|
|
|
|
|
|
### Update client
|
|
|
|
Request:
|
|
|
|
POST /control/clients/update
|
|
|
|
{
|
|
name: "client1"
|
|
data: {
|
|
name: "client1"
|
|
ip: "..."
|
|
mac: "..."
|
|
use_global_settings: true
|
|
filtering_enabled: false
|
|
parental_enabled: false
|
|
safebrowsing_enabled: false
|
|
safesearch_enabled: false
|
|
}
|
|
}
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
Error response (Client not found):
|
|
|
|
400
|
|
|
|
|
|
### Delete client
|
|
|
|
Request:
|
|
|
|
POST /control/clients/delete
|
|
|
|
{
|
|
name: "client1"
|
|
}
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
Error response (Client not found):
|
|
|
|
400
|
|
|
|
|
|
## DNS access settings
|
|
|
|
There are low-level settings that can block undesired DNS requests. "Blocking" means not responding to request.
|
|
|
|
There are 3 types of access settings:
|
|
* allowed_clients: Only these clients are allowed to make DNS requests.
|
|
* disallowed_clients: These clients are not allowed to make DNS requests.
|
|
* blocked_hosts: These hosts are not allowed to be resolved by a DNS request.
|
|
|
|
|
|
### List access settings
|
|
|
|
Request:
|
|
|
|
GET /control/access/list
|
|
|
|
Response:
|
|
|
|
200 OK
|
|
|
|
{
|
|
allowed_clients: ["127.0.0.1", ...]
|
|
disallowed_clients: ["127.0.0.1", ...]
|
|
blocked_hosts: ["host.com", ...]
|
|
}
|
|
|
|
|
|
### Set access settings
|
|
|
|
Request:
|
|
|
|
POST /control/access/set
|
|
|
|
{
|
|
allowed_clients: ["127.0.0.1", ...]
|
|
disallowed_clients: ["127.0.0.1", ...]
|
|
blocked_hosts: ["host.com", ...]
|
|
}
|
|
|
|
Response:
|
|
|
|
200 OK
|