2020-06-25 10:43:25 +00:00
Similar to [dwm-flexipatch ](https://github.com/bakkeby/dwm-flexipatch ) this st 0.8.4 (367803, 2020-06-19) project has a different take on st patching. It uses preprocessor directives to decide whether or not to include a patch during build time. Essentially this means that this build, for better or worse, contains both the patched _and_ the original code. The aim being that you can select which patches to include and the build will contain that code and nothing more.
2019-09-16 07:35:57 +00:00
2020-04-02 06:43:00 +00:00
For example to include the `alpha` patch then you would only need to flip this setting from 0 to 1 in [patches.h ](https://github.com/bakkeby/st-flexipatch/blob/master/patches.def.h ):
2019-09-16 07:35:57 +00:00
```c
#define ALPHA_PATCH 1
```
2019-10-16 06:28:00 +00:00
Once you have found out what works for you and what doesn't then you should be in a better position to choose patches should you want to start patching from scratch.
Alternatively if you have found the patches you want, but don't want the rest of the flexipatch entanglement on your plate then you may want to have a look at [flexipatch-finalizer ](https://github.com/bakkeby/flexipatch-finalizer ); a custom pre-processor tool that removes all the unused flexipatch code leaving you with a build that contains the patches you selected.
2019-09-17 06:53:00 +00:00
Refer to [https://st.suckless.org/ ](https://st.suckless.org/ ) for details on the st terminal, how to install it and how it works.
2019-09-16 07:35:57 +00:00
---
### Changelog:
2020-06-25 10:43:25 +00:00
2020-06-25 - Upgrade to 0.8.4 (367803, 2020-06-19)
2020-06-14 18:04:27 +00:00
2020-06-14 - Added w3m patch
2020-06-10 19:02:22 +00:00
2020-06-10 - Upgrade to 249ef9, 2020-06-01
2020-06-05 11:43:14 +00:00
2020-06-05 - Added the ligatures patch
2020-05-20 13:04:43 +00:00
2020-05-20 - Upgrade to 222876, 2020-05-09, and removed visualbell 1, 2, 3 patches and force redraw after keypress due to incompatibility. Refer to tag [371878 ](https://github.com/bakkeby/st-flexipatch/tree/371878 ) if you want to try these out.
auto-sync: draw on idle to avoid flicker/tearing
st could easily tear/flicker with animation or other unattended
output. This commit eliminates most of the tear/flicker.
Before this commit, the display timing had two "modes":
- Interactively, st was waiting fixed `1000/xfps` ms after forwarding
the kb/mouse event to the application and before drawing.
- Unattended, and specifically with animations, the draw frequency was
throttled to `actionfps`. Animation at a higher rate would throttle
and likely tear, and at lower rates it was tearing big frames
(specifically, when one `read` didn't get a full "frame").
The interactive behavior was decent, but it was impossible to get good
unattended-draw behavior even with carefully chosen configuration.
This commit changes the behavior such that it draws on idle instead of
using fixed latency/frequency. This means that it tries to draw only
when it's very likely that the application has completed its output
(or after some duration without idle), so it mostly succeeds to avoid
tear, flicker, and partial drawing.
The config values minlatency/maxlatency replace xfps/actionfps and
define the range which the algorithm is allowed to wait from the
initial draw-trigger until the actual draw. The range enables the
flexibility to choose when to draw - when least likely to flicker.
It also unifies the interactive and unattended behavior and config
values, which makes the code simpler as well - without sacrificing
latency during interactive use, because typically interactively idle
arrives very quickly, so the wait is typically minlatency.
While it only slighly improves interactive behavior, for animations
and other unattended-drawing it improves greatly, as it effectively
adapts to any [animation] output rate without tearing, throttling,
redundant drawing, or unnecessary delays (sounds impossible, but it
works).
2020-05-20 12:15:57 +00:00
2020-04-20 11:06:39 +00:00
2020-04-20 - Upgrade to c279f5, 2020-04-19, and added the force redraw on pselect after key is pressed patch and the externalpipein patch
2020-04-20 10:14:49 +00:00
2020-03-29 14:46:38 +00:00
2020-03-29 - Added invert and workingdir patches
2020-03-29 13:38:16 +00:00
2020-03-24 19:05:07 +00:00
2020-03-24 - Upgraded to latest (master) of st (commit 51e19ea11dd42eefed1ca136ee3f6be975f618b1 at the time of writing). Custom changes to make the altscreen mouse scollback patch working.
2020-03-21 15:41:43 +00:00
2020-03-21 - Added font2 patch
2020-01-07 07:05:00 +00:00
2020-01-07 - Added st embedder patch
2019-10-16 06:28:00 +00:00
2019-10-16 - Introduced [flexipatch-finalizer ](https://github.com/bakkeby/flexipatch-finalizer )
2019-09-17 06:53:00 +00:00
2019-09-17 - Added relativeborder, fix-keyboard-input, iso14755, visualbell, right-click-to-plumb, boxdraw and keyboard-select patches
2019-09-16 23:18:44 +00:00
2019-09-16 - Added alpha, anysize, bold-is-not-bright, clipboard, copyurl, disable-fonts, externalpipe, fixime, hidecursor, newterm, open-copied-url, vertcenter, scrollback, spoiler, themed cursor and xresources patches
2019-09-16 07:35:57 +00:00
### Patches included:
- [alpha ](https://st.suckless.org/patches/alpha/ )
- adds transparency for the terminal
- [anysize ](https://st.suckless.org/patches/anysize/ )
2019-09-16 07:40:40 +00:00
- allows st to reize to any pixel size rather than snapping to character width / height
- [bold-is-not-bright ](https://st.suckless.org/patches/bold-is-not-bright/ )
- by default bold text is rendered with a bold font in the bright variant of the current color
2019-09-16 08:40:16 +00:00
- this patch makes bold text rendered simply as bold, leaving the color unaffected
2019-09-17 06:53:00 +00:00
- [boxdraw ](https://st.suckless.org/patches/boxdraw/ )
- adds dustom rendering of lines/blocks/braille characters for gapless alignment
2019-09-16 08:40:16 +00:00
- [clipboard ](https://st.suckless.org/patches/clipboard/ )
- by default st only sets PRIMARY on selection
- this patch makes st set CLIPBOARD on selection
- [copyurl ](https://st.suckless.org/patches/copyurl/ )
- this patch allows you to select and copy the last URL displayed with Mod+l
- multiple invocations cycle through the available URLs
- [disable-fonts ](https://st.suckless.org/patches/disable_bold_italic_fonts/ )
2019-09-16 10:40:07 +00:00
- this patch adds the option of disabling bold/italic/roman fonts globally
2019-09-16 23:18:44 +00:00
- [externalpipe ](https://st.suckless.org/patches/externalpipe/ )
- this patch allows for eading and writing st's screen through a pipe, e.g. to pass info to dmenu
2020-04-20 11:06:39 +00:00
- [externalpipein ](https://lists.suckless.org/hackers/2004/17218.html )
2020-04-20 10:43:04 +00:00
- this patch prevents the reset of the signal handler set on SIGCHILD, when the forked process that executes the external process exits
2020-04-20 11:06:39 +00:00
- it adds the externalpipein function to redirect the standard output of the external command to the slave size of the pty, that is, as if the external program had been manually executed on the terminal
- this can be used to send desired escape sequences to the terminal with a shortcut (e.g. to change colors)
2020-04-20 10:43:04 +00:00
2020-03-24 10:34:18 +00:00
- [~fixime~ ](https://st.suckless.org/patches/fix_ime/ )
2019-09-16 10:40:07 +00:00
- adds better Input Method Editor (IME) support
2020-03-24 10:25:39 +00:00
- (included in the base as per [35f7db ](https://git.suckless.org/st/commit/e85b6b64660214121164ea97fb098eaa4935f7db.html ))
2019-09-16 10:40:07 +00:00
2019-09-17 06:53:00 +00:00
- [fix-keyboard-input ](https://st.suckless.org/patches/fix_keyboard_input/ )
- allows cli applications to use all the fancy key combinations that are available to GUI applications
2020-03-21 15:41:43 +00:00
- [font2 ](https://st.suckless.org/patches/font2/ )
- allows you to add a spare font besides the default
auto-sync: draw on idle to avoid flicker/tearing
st could easily tear/flicker with animation or other unattended
output. This commit eliminates most of the tear/flicker.
Before this commit, the display timing had two "modes":
- Interactively, st was waiting fixed `1000/xfps` ms after forwarding
the kb/mouse event to the application and before drawing.
- Unattended, and specifically with animations, the draw frequency was
throttled to `actionfps`. Animation at a higher rate would throttle
and likely tear, and at lower rates it was tearing big frames
(specifically, when one `read` didn't get a full "frame").
The interactive behavior was decent, but it was impossible to get good
unattended-draw behavior even with carefully chosen configuration.
This commit changes the behavior such that it draws on idle instead of
using fixed latency/frequency. This means that it tries to draw only
when it's very likely that the application has completed its output
(or after some duration without idle), so it mostly succeeds to avoid
tear, flicker, and partial drawing.
The config values minlatency/maxlatency replace xfps/actionfps and
define the range which the algorithm is allowed to wait from the
initial draw-trigger until the actual draw. The range enables the
flexibility to choose when to draw - when least likely to flicker.
It also unifies the interactive and unattended behavior and config
values, which makes the code simpler as well - without sacrificing
latency during interactive use, because typically interactively idle
arrives very quickly, so the wait is typically minlatency.
While it only slighly improves interactive behavior, for animations
and other unattended-drawing it improves greatly, as it effectively
adapts to any [animation] output rate without tearing, throttling,
redundant drawing, or unnecessary delays (sounds impossible, but it
works).
2020-05-20 12:15:57 +00:00
- [~force-redraw-after-keypress~ ](https://lists.suckless.org/hackers/2004/17221.html )
- ~this patch forces the terminal to check for new data on the tty on keypress with the aim of reducing input latency~
2020-04-20 10:14:49 +00:00
2019-09-16 10:40:07 +00:00
- [hidecursor ](https://st.suckless.org/patches/hidecursor/ )
- hides the X cursor whenever a key is pressed and show it back when the mouse is moved in the terminal window
2020-03-29 13:38:16 +00:00
- [invert ](https://st.suckless.org/patches/invert/ )
- adds a keybinding that lets you invert the current colorscheme of st
- this provides a simple way to temporarily switch to a light colorscheme if you use a dark colorscheme or visa-versa
2019-09-17 06:53:00 +00:00
- [iso14755 ](https://st.suckless.org/patches/iso14755/ )
- pressing the default binding Ctrl+Shift-i will popup dmenu, asking you to enter a unicode codepoint that will be converted to a glyph and then pushed to st
- [keyboard-select ](https://st.suckless.org/patches/keyboard_select/ )
- allows you to select text on the terminal using keyboard shortcuts
2020-06-05 11:43:14 +00:00
- [ligatures ](https://st.suckless.org/patches/ligatures/ )
- adds support for drawing ligatures using the Harfbuzz library to transform original text of a single line to a list of glyphs with ligatures included
2019-09-16 10:40:07 +00:00
- [newterm ](https://st.suckless.org/patches/newterm/ )
- allows you to spawn a new st terminal using Ctrl-Shift-Return
- it will have the same CWD (current working directory) as the original st instance
- [open-copied-url ](https://st.suckless.org/patches/open_copied_url/ )
2019-09-16 13:31:58 +00:00
- open contents of the clipboard in a user-defined browser
2019-09-17 06:53:00 +00:00
- [relativeborder ](https://st.suckless.org/patches/relativeborder/ )
- allows you to specify a border that is relative in size to the width of a cell in the terminal
- [right-click-to-plumb ](https://st.suckless.org/patches/right_click_to_plumb/ )
- allows you to right-click on some selected text to send it to the plumbing program of choice
2019-09-16 13:31:58 +00:00
- [scrollback ](https://st.suckless.org/patches/scrollback/ )
- allows you scroll back through terminal output using keyboard shortcuts or mousewheel
2020-01-07 07:05:00 +00:00
- st-embedder
- this patch allows clients to embed into the st window and can be useful if you tend to start X applications from the terminal
- the behavior is similar to Plan 9 where applications can take over windows
2019-09-16 23:18:44 +00:00
- [spoiler ](https://st.suckless.org/patches/spoiler/ )
- use inverted defaultbg/fg for selection when bg/fg are the same
- [themed-cursor ](https://st.suckless.org/patches/themed_cursor/ )
- instead of a default X cursor, use the xterm cursor from your cursor theme
2019-09-16 13:31:58 +00:00
- [vertcenter ](https://st.suckless.org/patches/vertcenter/ )
- vertically center lines in the space available if you have set a larger chscale in config.h
auto-sync: draw on idle to avoid flicker/tearing
st could easily tear/flicker with animation or other unattended
output. This commit eliminates most of the tear/flicker.
Before this commit, the display timing had two "modes":
- Interactively, st was waiting fixed `1000/xfps` ms after forwarding
the kb/mouse event to the application and before drawing.
- Unattended, and specifically with animations, the draw frequency was
throttled to `actionfps`. Animation at a higher rate would throttle
and likely tear, and at lower rates it was tearing big frames
(specifically, when one `read` didn't get a full "frame").
The interactive behavior was decent, but it was impossible to get good
unattended-draw behavior even with carefully chosen configuration.
This commit changes the behavior such that it draws on idle instead of
using fixed latency/frequency. This means that it tries to draw only
when it's very likely that the application has completed its output
(or after some duration without idle), so it mostly succeeds to avoid
tear, flicker, and partial drawing.
The config values minlatency/maxlatency replace xfps/actionfps and
define the range which the algorithm is allowed to wait from the
initial draw-trigger until the actual draw. The range enables the
flexibility to choose when to draw - when least likely to flicker.
It also unifies the interactive and unattended behavior and config
values, which makes the code simpler as well - without sacrificing
latency during interactive use, because typically interactively idle
arrives very quickly, so the wait is typically minlatency.
While it only slighly improves interactive behavior, for animations
and other unattended-drawing it improves greatly, as it effectively
adapts to any [animation] output rate without tearing, throttling,
redundant drawing, or unnecessary delays (sounds impossible, but it
works).
2020-05-20 12:15:57 +00:00
- [~visualbell~ ](https://st.suckless.org/patches/visualbell/ )
- ~adds visual indicators for the terminal bell event~
2019-09-17 06:53:00 +00:00
2020-06-14 18:04:27 +00:00
- [w3m ](https://st.suckless.org/patches/w3m/ )
- adds support for w3m images
2020-03-29 14:46:38 +00:00
- [workingdir ](https://st.suckless.org/patches/workingdir/ )
- allows user to specify the initial path st should use as the working directory
2019-09-16 13:31:58 +00:00
- [xresources ](https://st.suckless.org/patches/xresources/ )
- adds the ability to configure st via Xresources
- during startup, st will read and apply the resources named in the resources[] array in config.h
